Title: Effect of HEA/Al composite interlayer on microstructure and mechanical property of Ti/Mg bimetal composite by solid-liquid compound casting
DOI: https://doi.org/10.1007/s41230-022-2105-z
Author: Jin Cheng, Jian-hua Zhao, Chun Wang, Jing-jing Shangguan, *Cheng Gu, and Ya-jun Wang
Corresponding author: *Cheng Gu: Male, born in 1990, Ph. D, Assistant Professor. His research interest mainly focuses on high strength aluminum alloy and composite materials technology, and multi-scale simulation of materials processing. To date, he has published more than 50 academic papers.
E-mail: gucheng.90@cqu.edu.cn
Abstract: In this study, HEA/Al composite interlayer was used to fabricate Ti/Mg bimetal composites by solid-liquid compound casting process. The Al layer was prepared on the surface of TC4 alloy by hot dipping, and the FeCoNiCr HEA layer was prepared by magnetron sputtering onto the Al layer. The influence of the HEA layer thickness and pouring temperature on interface evolution was investigated based on SEM observation and thermodynamic analysis. Results indicate that the sluggish diffusion effect of HEA can effectively inhibit the interfacial diffusion between Al and Mg, which is conducive to the formation of solid solution, especially when the thickness of HEA is 800 nm. With the increase of casting temperature from 720 °C to 730 °C, 740°C, and 750 °C, α-Al(Mg), α-Al(Mg)+Al3Mg2, Al3Mg2+Al12Mg17, and Al12Mg17+δ-Mg are formed at the interface of Ti/Mg bimetal, respectively. When the thickness of the HEA layer is 800 nm and the pouring temperature is 720 °C, the bonding strength of the Ti/Mg bimetal can reach the maximum of 93.6 MPa.
If you'd like to learn more, please get it free at the following website:
https://www.springer.com/journal/41230 or
http://www.foundryworld.com/en/indexzhong.php/zazhishe/chinaguokan/type/3
More on Magnesium alloys
Effect of HEA/Al composite interlayer on microstructure and mechanical property of Ti/Mg bimetal composite by solid-liquid compound casting(Vol. 20 No. 1, 2023)
Jin Cheng, Jian-hua Zhao, Chun Wang, Jing-jing Shangguan, Cheng Gu, and Ya-jun Wang
https://doi.org/10.1007/s41230-022-2105-z
Effect of La addition on semi-solid microstructure evolution of Mg-7Zn magnesium alloy(Vol. 19 No. 5, 2022)
Zhan-yu Zhang, Xiao-feng Huang, Fan Yang, Sheng Zhang, and Jiao-li Fu
https://doi.org/10.1007/s41230-022-1191-2
Improvement of microstructure, mechanical properties, and corrosion resistance of WE43 alloy by squeeze casting(Vol. 19 No. 5, 2022)
Jian-cong Bian, Bao-yi Yu, Jian-fei Hao, Hui-wen Zhu, Hui-shu Wu, Bin Chen, Wei-rong Li, Yan-fang Li, Li Zheng, and Run-xia Li
https://doi.org/10.1007/s41230-022-1181-4
Effect of electromagnetic parameters on melt flow and heat transfer of AZ80 Mg alloy during differential phase electromagnetic DC casting based on numerical simulation(Vol. 19 No. 3, 2022)
Yong-hui Jia, Cheng-lu Hu, Qi-chi Le, and Wen-yi Hu
https://doi.org/10.1007/s41230-022-1156-5
Defect band formation in high pressure die casting AE44 magnesium alloy(Vol. 19 No. 3, 2022)
Ying-ying Hou, Meng-wu Wu, Feng Huang, Xiao-bo Li, and Shou-mei Xiong
https://doi.org/10.1007/s41230-022-1220-1
Microstructure evolution and age-hardening response in Mg-Sn-Sm alloys under a wide range of Sm/Sn ratio(Vol. 19 No. 3, 2022)
Feng Liu, Wen-xin Hu, Zheng-hua Yang, Wei Wang, and Wei He
https://doi.org/10.1007/s41230-022-1120-4
Effect of Gd content on hot-tearing susceptibility of Mg-6Zn-xGd casting alloys(Vol. 19 No. 2, 2022)
He Qin, Guang-yu Yang, Xun-wei Zheng, Shi-feng Luo, Tong Bai, and Wan-qi Jie
https://doi.org/10.1007/s41230-022-1117-z
Influence of different high pressure die casting processes on 3D porosity distribution of Mg-3.0Nd-0.3Zn-0.6Zr alloy(Vol. 18 No. 6, 2021)
Yi-hu Ma, Wen-bo Yu, Yu-qi Zhou, et al
https://doi.org/10.1007/s41230-021-1068-9
Effects of SiCp on microstructures of semisolid extruded AZ91D magnesium alloys in recrystallization process(Vol. 18 No. 6, 2021)
Ao-xue Jiang, Zhi-yong You, Zhuang-zheng Duan, et al
https://doi.org/10.1007/s41230-021-1005-y
Influence of a low-frequency alternating magnetic field on hot tearing susceptibility of EV31 magnesium alloy(Vol. 18 No. 3, 2021)
Xin Su, Jing-fu Huang, Xu-dong Du, et al
https://doi.org/10.1007/s41230-021-1011-0
(Y, Gd)H2 phase formation in as-cast Mg-6Gd-3Y-0.5Zr alloy(Vol. 18 No. 3, 2021)
Fei Wang, Bin-guo Fu, Yu-feng Wang, et al
https://doi.org/10.1007/s41230-021-1013-y
Effect of ageing treatment on microstructures, mechanical properties and corrosion behavior of Mg-Zn-RE-Zr alloy micro-alloyed with Ca and Sr(Vol. 18 No. 2, 2021)
Yu Fu, Chen Liu, Hai Hao, et al
https://doi.org/10.1007/s41230-021-0146-3
Microstructure evolution and mechanical properties of Mg-12Zn-2Y alloy containing quasicrystal phase fabricated by different casting processes(Vol. 18 No. 2, 2021)
Ji-guang Liu, Bu-ke Dong, Xiao-gang Fang, et al
https://doi.org/10.1007/s41230-021-0132-9
Microstructure and mechanical properties of AZ91D magnesium alloy by expendable pattern shell casting with different mechanical vibration amplitudes and pouring temperatures(Vol. 18 No. 1, 2021)
Suo Fan, He-bao Wu, Jin-xiu Fang
https://doi.org/10.1007/s41230-021-0113-z
Microstructures and tensile properties of as-cast Mg-5Sn-1Si magnesium alloy modified with trace elements of Y, Bi, Sb and Sr(Vol. 18 No. 1, 2021)
He-shuai Yu, Xue-feng Guo, Hong-bao Cui
https://doi.org/10.1007/s41230-021-0117-8
Hot tearing behavior of NZ30K Mg alloy under progressive solidification(Vol. 18 No.1, 2021)
Ke Wang, Peng-huai Fu, Li-ming Peng, et al
https://doi.org/10.1007/s41230-021-0066-2
Corrosion and chemical behavior of Mg97Zn1Y2-1wt.%SiC under different corrosion solutions(Vol. 18 No. 1, 2021)
Di-qing Wan, Yan-dan Xue, Jia-jun Hu, et al
https://doi.org/10.1007/s41230-021-0009-y
Effect of Gd addition on mechanical and microstructural properties of Mg-xGd-2.6Nd-0.5Zn-0.5Zr cast alloys(Vol. 17 No. 3, 2020)
Liang Zhan, Yi-zhi Le, Zhi-jun Feng, et al
https://doi.org/10.1007/s41230-020-9070-1
Effect of heat treatment on microstructure and properties of semi-solid squeeze casting AZ91D(Vol. 17 No. 3, 2020)
Zhi-yong You, Ao-xue Jiang, Zhuang-zheng Duan, et al
https://doi.org/10.1007/s41230-020-9103-9
Aging kinetics of 14H-LPSO precipitates in Mg-Zn-Y alloy(Vol. 17 No. 1, 2020)
Di-ging Wan, Hou-bin Wang, Zhu-min Li, et al
https://doi.org/10.1007/s41230-020-9088-4