Foundry Journal Agency

Home

News

A key paper of latest issue (Vol.19 No.4) of CHINA FOUNDRY

Time：2022-09-22　　　Hits：1255

Title: Iterative reverse deformation optimization design of castings based on numerical simulation of solidification thermal stress

DOI: https://doi.org/10.1007/s41230-022-2034-x

Author: Yu-hao Chen, *Dun-ming Liao, Wei-dong Li, Tao Chen, Ming Yang, and Jun-ke Shi

Corresponding author:

*Dun-ming Liao: Male, born in 1973, Ph.D, Professor. His research interest mainly focuses on casting process simulation, especially on casting stress simulation and casting process CAD.
E-mail: liaodunming@hust.edu.cn

Abstract: In the casting process, in order to compensate for the solidification shrinkage to obtain higher dimensional accuracy of the casting, it is often necessary to modify the original design of castings, and a suitable compensation method has a decisive impact on the dimensional accuracy of the actual casting. In this study, based on solidification simulation, a design method of reverse deformation is proposed, and two compensation methods, empirical compensation and direct reverse deformation, are implemented. The simulation results show that the empirical compensation method has problems such as difficulty in determining the parameters and satisfaction of both the overall and local accuracy at the same time; while based on the simulation results for each node of the casting, the direct reverse deformation design achieves the design with shape. In addition, the casting model can be optimized through iterative revisions, so that higher dimensional accuracy can be continuously obtained in the subsequent design process. Therefore, the direct reverse deformation design is more accurate and reasonable compared to empirical compensation method.

Keywords: casting simulation; thermal stress deformation; dimensional compensation; dimensional accuracy

If you'd like to learn more, please get it free at the following website: https://www.springer.com/journal/41230 or http://www.foundryworld.com/en/indexzhong.php/zazhishe/chinaguokan/type/3

More on Numerical Simulation

Quantitative multi-phase-field modeling of non-isothermal solidification in hexagonal multicomponent alloys（Vol. 19 No. 3, 2022）
Yong-biao Wang, Ming-guang Wei, Xin-tian Liu, Cong Chen, Jian-xiu Liu, Yu-juan Wu, Shuai Dong, and Li-ming Peng
https://doi.org/10.1007/s41230-022-1123-y

Phase-field modeling of dendritic growth of magnesium alloys with a parallel-adaptive mesh refinement algorithm（Vol. 18 No. 6, 2021）
Bing-hui Tian, Meng-wu Wu, Ang Zhang, et al
https://doi.org/10.1007/s41230-021-1116-5

Three-dimensional multi-phase-field simulation of eutectoid alloy based on OpenCL parallel（Vol. 18 No. 3, 2021）
Chang-sheng Zhu, Yu-jie Li, Fang-lan Ma, et al

https://doi.org/10.1007/s41230-021-0123-x

Distinctions of dendritic behavior influenced by constant pressure and periodic pressure（Vol. 18 No. 2, 2021）
Shan Shang, Zhi-peng Guo, Zhi-qiang Han, et al
https://doi.org/10.1007/s41230-021-0149-0

Confluence and cold shut computation based on time field in casting simulation（Vol. 18 No. 2, 2021）
Yong-shuai Feng, Dun-ming Liao, Tao Chen
https://doi.org/10.1007/s41230-021-9008-2

Multi-phase field simulation of multi-grain peritectic transition in multiple phase transformation（Vol. 17 No. 5, 2020）
Li Feng, Jun-he Zhong, Chang-sheng Zhu, et al
https://doi.org/10.1007/s41230-020-9136-0

Influence of periodic pressure on dendritic morphology and sidebranching（Vol. 17 No. 4, 2020）
Shan Shang, Zhi-peng Guo, Zhi-qiang Han, et al
https://doi.org/10.1007/s41230-020-0025-3

Phase field simulation of liquid-solid-eutectoid multiple phase transformations of a Fe-C binary alloy（Vol. 17 No. 4, 2020）
Li Feng, Jun-he Zhong, Chang-sheng Zhu, et al
https://doi.org/10.1007/s41230-020-9125-3

Three dimensional modeling method of MIMICS adjacent mask spherical open cell aluminum foam-polyurethane composites based on DICOM data (Vol. 17 No. 4, 2020）
Ming-si Qi, Wei Zhang, Guang-ming Ren, et al
https://doi.org/10.1007/s41230-020-9094-6

Numerical simulation and optimization of shell mould casting process for leaf spring bracket（Vol. 17 No. 1, 2020）
Ji-guang Liu, Lei Yang, Xiao-gang Fang, et al
https://doi.org/10.1007/s41230-020-9089-3

Effect of ladle outlet geometry on internal porosity in gravity casting automotive brackets: An experimental investigation（Vol. 17 No. 1, 2020）
Jaehoon Choi, Hoyoung Hwang, and Shinill Kang
https://doi.org/10.1007/s41230-020-9123-5

Numerical simulation and experimental validation on fabrication of nickel-based superalloy Kagome lattice sandwich structures（Vol. 17 No. 1, 2020）
Yan-peng Wei, Bo Yu, Quan-zhan Yang, et al
https://doi.org/10.1007/s41230-020-9100